Comparison of Roofing Felt & Tar Paper

A housing project has different aspects. Different terms are used, which can be quite confusing. The roof is a critical part of a building and the materials used must be noted and understood. Roof projects are of great importance, whether it is to fix a leak or replace your entire roof.

As a resident of Abington, it is essential to understand what roofing felt and a tar paper is, as the difference between the terms is not always obvious. Knowing what each roofing material does will help you decide which material to use, whether you want to combine both, or use either one.

Both materials can be used as subfloors, but they are two completely different terms. They protect the building from external weather conditions. Both materials can also be found in the walls of buildings. They are used to prevent the ingress of water into the walls and roof.

Have a Abington Roofing Company discuss your plans for your home before making your final decision.

Overview of the materials

roofing felt

Roofing felt is made of asphalt-saturated felt paper. The saturated felt paper is soaked with asphalt mixed with fiberglass, asbestos and fine minerals. It is produced in rolls.

Roofing felt has two sides:

  • The side that is reinforced with fiberglass, asbestos and fine minerals (talcum powder) is the side that is exposed to the weather, and;
  • The other side is covered with a material that prevents different parts of the roofing felt from sticking together.

Contemporary roofing felt, used by roofing experts in Abington, is made from inorganic materials such as fiberglass and polyester.

Roofing felt is the raw material from which asphalt shingles and roll roofing are produced. In the past, the raw materials for making roofing felt were considered organic. Examples are asbestos rags, jute and wood. Asbestos is no longer used because of its harmful effects on health. Contemporary roofing felt, which is used by roofers in Abington, is made of inorganic materials such as fiberglass and polyester.

roofing felt

Tar paper is manufactured by infusing a fiberglass mat with tar. Tar paper can be found in very old houses. It was manufactured around the time when crude oil was found. In the past, used rags were recycled and used in the production of tar paper. They are soaked with tar and then used for various construction projects.

Tar paper made in recent years is made from cardboard paper and sawdust. Like roofing felt, it is water-resistant and is used to prevent water from destroying the roof deck and entering a building. Tar paper is not resistant to sun and wind and is therefore not only used in construction projects.

Like roofing felt, it is packed in rolls for delivery. Tar paper can be seen in old houses in Abington.

Why do you need roofing felt or tar paper?

As mentioned earlier, these roofing materials are used as subfloors. A house in Abington needs a subfloor despite another layer of roofing for the following reason:

  • It prevents your roof terrace from being flooded.
  • It protects your home from lightning and other fire hazards.
  • It protects your home from heavy rain and wind.

Using roofing felt or tar paper should not be a problem for you as you can contact: professional roofers in Abington to help you with your roofing work. For other home improvement advice and support, Legacy Service USA LLC has everything you need. They have an A+ rating from the Better Business Bureau and have been in the home improvement business since 2005.

Comments are closed.